Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Fix broken link

This glossary covers astronomical terms, or other LSST terms related to the astronomy domain. See the DMS Glossary for technical terms related to the Data Management System software. Many terms (and in fact, algorithms) are borrowed from the vocabulary of SDSS. Actually, some of the definitions below are taken almost verbatim from the SDSS Glossary for terms in common. We gratefully acknowledge the curators of this excellent resource, however quotations are omitted in the interest of clarity in this Glossary. 

Here are quick links to the alphabetized glossary terms: 

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | ST | U | V | W | X | Y | Z

Anchor
A
A
A

Anchor
adaptive moments
adaptive moments

Adaptive moments

The second moments of the source intensity distribution, which are used for measuring source shapes. This approach is close to optimal for measuring the shapes of faint galaxies. 


Anchor
Airmass
Airmass

Airmass

The pathlength of light from an astrophysical source through the Earth's atmosphere. It is given approximately by sec z, where z is the angular distance from the zenith (the point directly overhead, where airmass = 1.0) to the source. 


Anchor
Amplifier
Amplifier

Amplifier

An electronic component of a CCD that is used to recover the signal during read-out. For LSST, multiple amplifiers on each CCD will enable simultaneous read-out of adjacent regions of each detector. Often this term is used, not quite correctly, as a synonym for a read-out channel.


Anchor
Alert
Alert

Alert

Refers to the structured communication that is issued rapidly via the internet to the community during the Alert Production. It is intended to characterize the detection of one or more sources that are new, or have changed significantly in position or brightness, relative to the applicable image template.


Anchor
Apparition
Apparition

Apparition

The appearance of a known object after having been invisible (or, undetected). 


Anchor
Aperture correction
Aperture correction

Aperture correction

A correction that is applied to fluxes of sources that were measured within a finite aperture, to account for the source flux that lies outside the aperture. This correction is usually based upon a model of the PSF as derived from bright, isolated stars. From the model one can derive the magnitude of the correction with aperture size and its variation with position in the image, which asymptotically approaches 1.0 at infinite aperture. Fluxes of sources in crowded fields are often measured with small apertures to avoid contamination, and then corrected with this approach. 


Anchor
Astrometry
Astrometry

Astrometry

In astronomy, the sub-discipline of astrometry concerns precision measurement of positions (at a reference epoch), and real and apparent motions of astrophysical objects. Real motion means 3-D motions of the object with respect to an inertial reference frame; apparent motions are an artifact of the motion of the Earth. Astrometry per se is sometimes confused with the act of determining a World Coordinate System (WCS), which is a functional characterization of the mapping from pixels in an image or spectrum to world coordinate such as (RA, Dec) or wavelength. 


Anchor
B
B
B

Anchor
Background
Background

Background

In an image, the background consists of contributions from the sky (e.g., clouds or scattered moonlight), and from the telescope and camera optics, which must be distinguished from the astrophysical background. The sky and instrumental backgrounds are characterized and removed by the processing software using a low-order spatial function whose coefficients are recorded in the image metadata. 


Anchor
C
C
C

Anchor
Cadence
Cadence

Cadence

The sequence of pointings, visit exposures, and exposure durations performed over the course of a survey


Anchor
Calexp
Calexp

Calexp

A fully qualified, calibrated science image, consisting of science pixels, a quality mask, a PSF characterization, and a WCS mapping. 


Anchor
Camera
Camera

Camera

An imaging device mounted at a telescope focal plane, composed of optics, a shutter, a set of filters, and one or more sensors arranged in a focal plane array. For details see Representation of a Camera in the LSST Stack


Anchor
Camcol
Camcol

Camcol

In the SDSS survey, a camera column is the range (in declination) covered by a single sensor in the camera


Anchor
CCD
CCD

CCD

A Charged-Coupled Device is a particular kind of solid-state sensor for detecting optical-band photons. It is composed of a 2-D array of pixels, and one or more read-out amplifiers


Anchor
CFHT-LS
CFHT-LS

CFHT-LS

A 5-passband legacy imaging survey conducted at the Canada-France-Hawaii Telescope from 2003-2008. 


Anchor
Channel
Channel

Channel

The raw data from a read-out amplifier of a sensor. For LSST there are 16 amplifiers for each science sensor, resulting in 16 parallel data channels from each device. 


Anchor
chi-squared co-add
chi-squared co-add

Chi-squared Co-Add (image)

An image that is the weighted sum of multiple input images, where for each input: 

Code Block
languagecpp
coadd.image += image.image**2 / image.variance
coadd.mask |= image.weightMap += weight

For bad pixels, coadd and weightMap are not altered. Note that the inputs must be aligned to a common projection and pixel grid and corrected to the same photometric scale and zero-point.  


Anchor
CoAddImage
CoAddImage

Co-add image

An image that is the combination of multiple input images. The inputs are aligned to a common projection and pixel grid, corrected to the same photometric scale and zero-point, with bad pixels and artifacts rejected. (Image PSFs may also be matched prior to co-addition.) Co-Add images have had non-astrophysical background removed. 


Anchor
D
D
D

Anchor
Deblend
Deblend

Deblend

Deblending is the act of inferring the intensity profiles of two or more overlapping sources from a single footprint within an image. Source footprints may overlap in crowded fields, or where the astrophysical phenomena intrinsically overlap (e.g., a supernova embedded in an external galaxy), or by spatial co-incidence (e.g., an asteroid passing in front of a star). Deblending may make use of a priori information from images (e.g., deep Co-Adds or visit images obtained in good seeing), from catalogs, or from models. 


Anchor
Dec
Dec

Declination

Often abbreviated Dec, it is a part of an equitorial coordinate pair that expresses the angular distance (usually expressed in degrees) from the Celestial Equator, measured along great circles that intersect the Equatorial poles. Positions south of the equator are given negative sign. 


Anchor
deVaucouleurs profile
deVaucouleurs profile

deVaucouleurs profile

The radial distribution of flux of an astronomical source that is characterized as: 

LaTeX Math Block
alignmentleft
I(r) = I_0 * exp(-7.67(r/r_e)^{1/4})

An elliptical version of this profile can be fit to every detected source, yielding the deVaucouleurs parameters. See the page on Measurement in the LSST Stack for details. 


Anchor
DIA Object
DIA Object

DIA Object

DIA object (often concatenated as DIAObject) is one that has been detected during difference image processing. It is distinguished from a regular object in that its brightness varies in time. 


Anchor
DIA Source
DIA Source

DIA Source

A DIA source (often concatenated as DIASource) is one that has been detected during difference image processing. It is distinguished from a regular source by at least one of the following properties: its uniqueness (i.e., no association to known objects); its variability in brightness; or, if it is associated with a Solar System Object, a change in coordinates. 


Anchor
Difference image
Difference image

Difference image

Refers to the result formed from the pixel-by-pixel difference of two images of the sky, after warping to the same pixel grid and scaling to the same photometric scale. The pixels in a difference thus formed should be zero (apart from noise) except for sources that are new, or have changed in brightness or position. In the LSST context, the difference is generally taken between a visit image and template


Anchor
DRP
DRP

Difference image processing

A pipeline that constructs differences between two images (usually a recent visit exposure and a template image) in order to detect sources that are new or that have changed brightness. The input images are transformed to a common grid, scaled to the same photometric response, and matched to the same PSF. Sources are detected above a configurable threshold on the difference image. This pipeline feeds the Alert processing. 


Anchor
E
E
E

Anchor
Eimage
Eimage

Eimage

An output product of PhoSim, an Eimage is a simulation of the response of a single sensor, where the outputs of the constituent amps have been integrated, and the effects of variations in pixel-to-pixel sensitivity and amplifier gains have been removed. 


Anchor
Epoch
Epoch

Epoch

TBA.  


Anchor
Ephemeris
Ephemeris

Ephemeris

An ephemeris (pl: ephemerides) gives the predicted positions of astronomical objects or artificial satellites in the sky with time. The ephemerides are computed from mathematical models of motion of the object and the Earth.  


Anchor
Exponential profile
Exponential profile

Exponential profile

The radial distribution of flux of an astronomical source that is characterized: 

LaTeX Math Block
alignmentleft
I(r) = I_0 * exp(-1.68 (r/r_e))

The normalization 1.68 is chosen so that the model radius is a half-light radius. An 2-dimensional elliptical version of this profile is fit to every detected source. 


Anchor
F
F
F

Anchor
Filter
Filter

Filter

filter in astronomy is an optical element used to restrict the passband of light reaching the focal plane–i.e., it transmits a selected range of wavelengths. Filters elements are often named after standard photometric passbands, such as those used in the SDSS survey: u, g, r, i, z


Anchor
FITS
FITS

FITS

Flexible Image Transport System, an international standard in astronomy for storing images, tables, and metadata in disk files. See the IAU FITS Standard for details. 


Anchor
Footprint
Footprint

Footprint

Shorthand for the spatial extent of a source in an image, or of the (often complex) boundary of an image, a co-add image, or a survey. For a source, the footprint is the set of image pixels that that contain flux from that source


Anchor
Flux
Flux

Flux

Shorthand for radiative flux, it is a measure of the transport of radiant energy per unit area per unit time. In astronomy this is usually expressed in cgs units: erg/cm2/s


Anchor
FPA
FPA

Focal plane array

A focal plane array (FPA) is the arrangement of multiple sensors in the focal plane of a camera. For LSST, the FPA is divided into an array of continguous rafts, upon which 9 science sensors are mounted 3x3. Additional engineering sensors are mounted on rafts near the periphery to support wavefront sensing and telescope guiding. 


Anchor
Forced photometry
Forced photometry

Forced photometry

A measurement of the photometric properties of a source, or expected source, with one or more parameters held fixed. Most often this means fixing the location of the center of the brightness profile (which may be known or predicted in advance), and measuring other properties such as total brightness, shape, and orientation. 


Anchor
H
H
H

Anchor
HTM
HTM

HTM

The Hierarchical Triangular Mesh (HTM) is a partitioning scheme to divide the surface of the unit sphere into spherical triangles. It is a hierarchical scheme and the subdivisions have roughly equal areas. HTM is used to index the coordinates in the object databases for faster querying speeds. 


Anchor
I
I
I

Anchor
Image template
Image template

Image template

A co-added, single-band image of the sky that is deep, and where all transients, SSObjects, and artifacts have been removed. Constituent images for Image Templates may be selected from a limited range of quality parameters, such as PSF size or airmass. Such images are used as templates to perform difference image processing in order to detect variable, transient, and Solar System astrophysical objects


Anchor
Instance catalog
Instance catalog

Instance Catalog

A catalog of astronomical sources containing source type, coordinates, brightnesses, and SEDs for use in creating simulated LSST images with PhoSim. Synonym with trim file


Anchor
J
J
J

Anchor
JD
JD

Julian Date

The Julian Date (JD) of any instant is the Julian day number for the preceding noon (UTC), plus the fraction of the day elapsed since that instant. The Julian day number is a running sequence of integral days, starting at noon, since the beginning of the Julian Period; JD 0.0 corresponds to noon on 1 January 4713 BCE. Various Julian Date converters are available on the Web. For example, 18h 00m 00.0s UT on 2014-July-01 (near the start of LSST construction) corresponds to JD 2456840.25. 


Anchor
M
M
M

Anchor
Magnitude Pogson
Magnitude Pogson

Magnitude, Pogson

Usually simply magnitude, it is a logarithmic measure of integrated source brightness, usually within a standard photometric passband, such that: 

LaTeX Math Inline
bodyM - M_0 = -2.5 log(F/F_0)
where the zero-point flux is defined by a photometric standard. 


Anchor
Magnitude Petrosian
Magnitude Petrosian

Magnitude, Petrosian

A magnitude determined from a fit to a Petrosian brightness profile: 

LaTeX Math Block
alignmentleft
R_P(r) = stuff

Appropriate for galaxies. 


Anchor
Magnitude PSF
Magnitude PSF

Magnitude, PSF

For isolated stars that are well described by the PSF, the optimal measure of the total flux is determined by fitting a PSF model to the object. 


Anchor
MJD
MJD

MJD

The Modified Julian Day is shorthand for the Julian Day: MJD = JD - 2400000.5, which makes MJD=0 correspond to UT midnight in 1858-Nov-17. The half-day offset from JD aligns the start of the day with modern civil timekeeping. 


Anchor
O
O
O

Anchor
Object
Object

Object

Refers to an astronomical object, such as a star, galaxy, asteroid, or other physical entity. Objects can be static, or change brightness or position with time. Generally an object will be associated with more than one instance of a source detection. 


Anchor
Overscan
Overscan

Overscan

Refers to the portion of the channel read-out of either a) non photo-active pixels, or b) additional read-out of the serial register after all science pixels have been accumulated (sometimes called virtual overscan). The overscan is often appended to the science pixels in the assembled amplifier image as a separate region. This region is useful to science processing software for estimating the stability of the DC offset in the read-out electronics. 


Anchor
P
P
P

Anchor
Passband
Passband

Passband

The window of wavelength or the energy range admitted by an optical system; specifically the transmission as a function of wavelength or energy. Typically the passband is limited by a filter. The width of the passband may be characterized in a variety of ways, including the width of the half-power points of the transmission curve, or by the equivalent width of a filter with 100% transmission within the passband, and zero elsewhere. 


Anchor
Photo-z
Photo-z

Photo-z

Redshift (of a galaxy) determined from multi-band photometry. Generally determined from a fit of source colors to grid of model SEDs with redshift. 


Anchor
Precover
Precover

Precover

In astronomy, this is an exercise to find detections of a newly discovered object in prior-epoch images. For example, finding the progenitor of a supernova, or prior apparitions of a solar system object at predicted locations in archived images, based on orbit parameters. 


Anchor
PSF
PSF

PSF

The Point-spread function is the distribution of intensity on a sensor (or image) originating from an unresolved point-source (i.e., a star). Often the PSF is not the same Airy shape as would be expected from a finite-aperture optical system, owing primarily to atmospheric effects and imperfections in the optical system and the detector. 


Anchor
R
R
R

Anchor
Raft
Raft

Raft

The sensors in the LSST camera are packaged into replaceable electronic assemblies, called rafts, consisting of 9 sensors in a 3x3 mosaic. 


Anchor
Raw Exposure
Raw Exposure

Raw Exposure

A raw exposure is the output from a camera, consisting of a set of image sections from each amplifier on each sensor on the focal plane array, including overscan


Anchor
RA
RA

Right Ascension

Often abbreviated RA, it is a part of an equitorial coordinate pair that expresses the angular distance along the Celestial Equator. It is analogous to terrestrial longitude. RA increases to the east along the projection of the Earth's equator, from the origin (i.e., the Vernal Equinox). Positions are customarily expressed in degrees (0 < RA < 360), or hours (0 < RA < 24, usually in sexagesimal format). 


Anchor
Raft
Raft

Raft

The sensors in the LSST camera are packaged into replaceable electronic assemblies, called rafts, consisting of 9 sensors in a 3x3 mosaic. 


Anchor
S
S
S

Anchor
SDSS
SDSS

SDSS

Sloan Digital Sky Survey is a digital survey of roughly 10,000 square degrees of sky around the north Galactic pole, plus a ~300 square degree stripe along the celestial equator. 


Anchor
SED
SED

SED

Spectral Energy Distribution, the radiated energy of an astrophysical object as a function of energy (or wavelength) across the entire spectrum of light. 


Anchor
Seeing
Seeing

Seeing

An astronomical term for characterizing the stability of the atmosphere, as measured by the width of the point-spread function on images. The PSF width is also affected by a number of other factors, including the airmass, passband, and the telescope and camera optics. 


Anchor
Sensor
Sensor

Sensor

A sensor is a generic term for a light-sensitive detector, such as a CCD. For LSST, sensors consist of a 2-D array of roughly 4K x 4K pixels, which are mounted on a raft


Anchor
Shape
Shape

Shape

The shape of an object is a functional characterization of its spatial intensity distribution. The integral of the shape is the flux. A functional characterization has the advantages of offering an analytical form that can be convolved with another function, distinguished from overlapping source shapes, and integrated to large radius to obtain the source flux. 


Anchor
SkyMap
SkyMap

Sky map

An all-sky tesselization for LSST. The Stack includes softare to define a geometric mapping from the representation of World Coordinates in input images to that used for LSST. 


Anchor
skyPatch
skyPatch

Sky patch

An quadrilateral sub-region of a sky tract, with a size in pixels chosen to fit easily into memory on desktop computers. 


Anchor
Sky tract
Sky tract

Sky tract

A portion of sky, a spherical convex polygon, within the LSST all-sky tessellation. The implementation for SDSS Stripe 82 divided this equatorial band into quadrangular tracts, bounded by constant RA and Dec. Each tract was subdivided into sky patches


Anchor
snap
snap

Snap

In normal LSST operations, a standard visit consists of two snaps, or two consecutive exposures with the same exposure time, telescope alignment, and filter. 


Anchor
Solar system body
Solar system body

Solar system object

A solar system object is an astrophysical object that is identified as part of the Solar System: planets and their satellites, asteroids, comets, etc. This class of object had historically been referred to within the LSST Project (rather imprecisely) as Moving Objects. (Everything moves, if you wait long enough.) 


Anchor
Source
Source

Source

A single detection of an astrophysical objectin an image, the characteristics for which are stored in the Source Catalog of the science database. The Data Management System attempts to associate multiple source detections to single objects, which may vary in brightness or position over time. 


Anchor
Source association
Source association

Source association

The process of associating source detections on multiple images taken at different epochs, or in multiple passbands, with a single astronomical object


Anchor
Stripe82
Stripe82

Stripe 82

A 2.5° wide equitorial band of sky covering roughly 300 square degrees that was observed repeatedly in 5 passbands during the course of the SDSS, In part for calibration purposes. 


Anchor
T
T
T

Anchor
Transient
Transient

Transient

A transient source is one that has been detected on a difference image, but has not been associated with either an astronomical object or a solar system body


Anchor
V
V
V

Anchor
Visit
Visit

Visit

A sequence of one or more consecutive exposures at a given position, orientation, and filter within the LSST cadence. The baseline visit for the main survey consists of two snaps of 15 s duration. 


Anchor
W
W
W

Anchor
WCS
WCS

WCS

A World Coordinate System is a mapping from image pixel coordinates to physical coordinates; in the case of images the mapping is to sky coordinates, generally in an equatorial (RA, Dec) system. The WCS is expressed in FITS file extensions as a collection of header keyword=value pairs (basically, the values of parameters for a selected functional representation of the mapping) that are specified in the FITS Standard